GoStream Omni 12 ISO Firmware
To have a better user experience, we highly recommend updating to the newest version of your GoStream Omni 12 ISO.
Please Read How To Update Firmware Part Below before Updating❗️❗️
For further information and troubleshooting,please contact us at support@osee-dig.com 📩
or join our Facebook group:
Historical Release Notes
V1.1.2 Release Note
1. Added independent WAV recording for MIC 1–4 during ISO recording.
2. Improved Solo monitoring: Audio channels can now be monitored individually via Solo even when the channel is not enabled.
3. Changed the maximum High Frequency value in the Equalizer menu to 12,000 Hz.
4. Fixed an issue where the MIC Preamp value was reset to 0 after performing a Factory Reset.
5. Fixed an occasional color display issue with UVC Out.
6. Fixed an issue where UVC Out could have no audio output when connected during system startup.
7. Fixed an occasional issue where vertical lines could appear in the live stream output.
8. Fixed a CF card read error that could cause audio to freeze.
9. Fixed an issue where switching to an unsupported NDI signal could cause the video to freeze.
10. Fixed an issue where noise could occur when MIC 1 and MIC 2 were configured with the same De-noising settings.
11. Fixed an issue on some units where HDMI IN 1 could fail to lock onto a 4K60 signal.
12. Fixed an issue where NDI sources could not be discovered after changing Ethernet settings from DHCP to Static IP.
13. Fixed an issue where switching an NDI source to an unsupported resolution and then back to a supported resolution could cause the video to freeze.
14. Updated several SDI output names in the menu: “SDI Out 1 → OUT 3” “SDI Out 2 → OUT 4”
V1.1.1 Release Note
1. The maximum supported duration for the Instant Replay function has been increased to 6 seconds.
2. Optimized the flashing logic of the streaming indicator on the control panel when streaming is unstable.
3. Optimized the flashing logic of the recording indicator on the control panel when recording is unstable.
4. Fixed an issue where the USB protocol was incorrectly identified when booting with two Type-C cables connected.
5. Fixed an issue where the UVC output might fail to be recognized after repeatedly plugging and unplugging the USB cable.
6. Fixed an issue where formatting high-capacity CFexpress cards would fail.
V1.1.0 Release Note
New Features
1. Added Instant Replay feature.
2. Added support for SRT/RTMP stream pulling.
3. Added Japanese and Chinese language support.
4. Added Audio Tally indicator.
5. Added source selection for still frame capture.
6. Added a pop-up notification upon successful firmware update.
7. Allowed mounting of low-speed storage cards, triggering a warning prompt rather than failing.
Bug Fixes & Improvements
1. Removed MJPEG format support for UVC output to guarantee optimal quality for NV12 and NV16 formats.
2. Fixed dropped frames and jitter issues with UVC output.
3. Fixed an issue where the first T-Bar or USK/DSK transition would fail after boot-up.
4. Fixed an issue preventing the IP and port of certain PTZ cameras from displaying in the search list.
5. Fixed a UI bug where CF card/SSD remaining capacity did not update dynamically during PGM recording.
6. Fixed occasional abnormal color output via UVC.
7. Fixed incorrect DNS data retrieval via DHCP.
V1.0.0 Release Note
Official release version.
